Ultrafuse® TPS 90A Details

filaments

Ultrafuse® TPS 90A

Ultrafuse® TPS 90A is an elastomer based on the raw material SEBS. The combination of durable and flexible building blocks leads to a very versatile material.

Compared to other flexible 3D printing materials it shows more rubber-like soft touch haptics and better non-slip properties. Furthermore, the material shows a reduced moisture uptake, which allows for printing without pre- drying.

Parts printed with Ultrafuse® TPS 90A show almost no visible layers or warpage, which makes it an excellent material choice for end-use parts.

Category: filaments
an-img-01
icon01
Benefits at a Glance
  • Soft touch
  • Non-slip properties
  • Reduced moisture uptake
  • Excellent layer adhesion
  • Very good low-temperature flexibility
  • Biocompatible
icon01
Example Applications
  • Functional flexible parts
  • Handles of appliances
  • Seals and gaskets
icon01
Material Properties
  • Shore D Hardness: 89
  • Abrasion Resistance: 111 mm3
  • Compression set at 23°C, 72h: 75%
  • Stress at Break: 7 MPa (XY), 2 MPa (ZX)
  • Elongation at Break: 280 % (XY), 9 % (ZX)
  • Tear Strength: 10 kN/m (XY), 5 kN/m (XZ), 4 kN/m (ZX)
icon01
Printing Guidelines*
  • Nozzle Temperature: 260-280 °C
  • Bed Temperature: 70°C - 90°C
  • Bed Material: PEI, PI or glue
  • Nozzle Diameter: ≥ 0.4 mm
  • Print Speed: 10- 30 mm / s